It includes electric and battery torque wrenches.

1. The machine solves the spark problem of the brush motor from the principle, and can operate efficiently and stably, extending the service life of the carbon brush to a greater extent.
2. Stable torque output, not easily affected by voltage fluctuations and long distance cable, suitable for construction site applications.
3. Precision ±5%, repeatability ±2%.
4. Continuous rotation without impact, automatic stop when the preset torque value is reached, much more efficient than intermittently driven hydraulic wrenches.
5. Three operating modes: torque mode, torque + rotation angle mode and fast mode.
6. Use of multi-stage gearbox. High reliability, high stability.
7. Standard counter acting force arm as the standard configuration, custom counter acting force arms available.
8. 220V 50Hz AC power, no need for an external pumping station and pipes.

1. Digital adjustment and display of the torque and the operating status and parameters of the wrench.
2. High speed pre-tightening of nuts in place, final tightening controlled by torque or rotation angle.
3. Precision ±4%, repeatability ±2%.
4. Remote synchronous operation of multiple devices to meet the requirements of special working conditions.
5. Optional battery pack assembly, long duration of flight, to improve work efficiency.
6. Battery level monitoring and compensation, motor temperature compensation, and dynamic torque compensation.
7. The torque can be set to be any value within the operating range of the torque wrench
8. Use of multi-stage gearbox, highly reliable and highly stable.
9. Support the torque + rotation angle mode.
10. Motor overheating protection function.
11. High precision planetary gear reduction mechanism, stable operation,sturdy and durable.

square driven axle, reaction arm mounting gear, planetary gearbox, electronic motor, LCD digital control interface, anti-skid handle, stard and stop trigger, reaction arm, power adapter, tool suitacse.

The LCD interface allows operators to navigate through menus on equipment. Torque regulation 1Nm increase and decrease.
And planetary gear deceleration system with high power output ratio makes the device lighter.
The handle with coree skid texture, confortable grip, suitable for all kinds of working condition.

Main Material: steel alloy.

snap ring for reaction arm, planetary gear cylinder, wheel cylinder connector, lithium batteries, brushless motor, display screen, rotating plate, multistage planetray gear set, reactiona rm, motor connector, quick charger.

Main Material: steel alloy.

1、When the system enters the menu mode, the system will automatically stop running. After setting the items to be modified, please switch to the menu "exit" item, and the system will automatically jump to the operation page.

2. Preset Torque Adjustment.

3. Mode Switching:
Mode option entry: generally select "torque mode". At this time, the system will work automatically according to the preset torque. For Fast mode, please refer to the notes below.

4. Record Check
In the "menu mode", adjust the "+" or "-" button to switch to the " record check" entry, and press the "confirm" key to enter the data view page.

5. System Time Adjustment
Press the "confirm" button, and the red value indicates the value being adjusted, which is in the order of year, month, day, hour, minute and second; press the "+" or "-" button to adjust the value, and press the "confirm" button to save when "save" is displayed at last. Or press the "exit" button to return to the menu. If the tool is not used for a long time, the system time will be wrong due to the consumption of backup power. To set the time, please switch to the "system time" option in the "menu" item and press the "confirm" button to enter the time setting.
Notes：
The system time is the reference time of data recording. If you find that the system time is not correct, please adjust the system time in time. (after adjusting the time, the machine will remain powered on for 30-60 minutes to charge the backup power supply). This can ensure the real-time accuracy of data recording.

6. System Language
In the "system language" page, press "+" or "-" to switch the required system language, and then press the "save" button to return to the menu page.

7. System Information
In the "menu" page, press "+" or "-" to switch to the "system information" item, and press the "confirm" button to enter the system information page.

8. Use of Data Port
For the first time, please install the data cable driver on the computer, then insert the cable into the computer and click the icon, open the interface of the software.

1. We own CE & ISO certification.
2. We're experienced manufacturer, which was established in 2009, and the factory takes an area of 10,000 square meters.
3. Our factory is equipped more than 50 machines, monthly output is over 3000 units of product, so that we can make fast delivery.
4. Factory direct sell, wholesale prices.
5. Customization service total engineering solutions.
6. Guaranteed after-sales service.
7. Has more than 70 patented technologies.
8. Professional technicians.
9. We are one of the two biggest Chinese manufacturers of bolting tools.
10. Compare with the most facmous brands in the field in the world, our products are more cost-effective.

1. When you cannot determine the required torque, we will recommend the appropriate product model for you according to the product application.
2. Our company can provide you with one-stop purchasing service, and all supporting products are available.
3. Perfect after-sales service system until you are satisfied.
4. Regular customers enjoy discounted prices and free maintenance services.
5. Video explained tutorials and written solution reports.