What is the defintion of the hydraulic torque wrench

A hydraulic torque wrench is a tool that uses hydraulic pressure to help achieve the desired level of torque on a fastener. It is used in many industries, including automotive, aerospace, and construction. There are many different types of hydraulic torque wrenches available, each designed for specific applications.

• what is the working process of the hydraulic torque wrench

• what is the use value of the torque spanner?

• What is the function of battery torque wrench?

what is the working process of the hydraulic torque wrench

When it comes to hydraulic torque wrench, there are actually two types: the pump and the impact. The working process for each is a bit different.

For the pump type, it works by using a hydraulic fluid that is pumped into the wrench. This increases the pressure inside the wrench, which in turn tightens the bolt or nut.

For the impact type, it uses an internal hammer to generate force. This force is then transferred to the bolt or nut, which causes it to loosen or tighten.

what is the use value of the torque spanner?

A torque spanner is a tool used to apply a precise amount of torque to a fastener, such as a nut or bolt. Torque is a measure of rotational force, and is usually expressed in Newton-meters (Nm). Applying the correct amount of torque to a fastener is critical in many applications, such as ensuring that bolts are properly tightened in an engine or preventing over-tightening and damage to delicate components.

There are many different types of torque wrenches available on the market, including digital models that can provide a very high degree of accuracy. However, even basic analog models can be quite useful if used correctly. When shopping for a torque wrench, it is important to consider the range of torques that you need to be able to apply, as well as the level of accuracy required.

What is the function of battery torque wrench?

The method of using battery torque wrench is to adjust the torque value you need on the wrench, and when the wrench is used to lock the bolt, it will make a click when the torque value is reached. At this time, the bolts should be loosened immediately to avoid over-torque.

Battery torque wrench is used to fasten bolts. High-strength bolts can be divided into two types: torsional shear type and large hexagonal type. The national standard torsional shear type high-strength bolts are M16, M20, M22, and M24. Now there are also non-national standard M27 and M30. Types; national standard large hexagonal high-strength bolts are M16, M20, M22, M24, M27, M30 and so on. Generally, the fastening of high-strength bolts requires initial tightening and then final tightening, and each step requires strict torque requirements.

Baier hydraulic Power(Wuhan) Co., Ltd, established in 2009. As a high-technology enterprise, the company has been keenly focused on integrating research, development, production, sale and service ofelectric &battery torque wrench, hydraulic torque wrench, hydraulic cylinders, hydraulic nut spitter,hydraulic pullers, hyraulic pumps and so on.