English 
Views: 0 Author: Site Editor Publish Time: 2022-12-06 Origin: Site
flange tool is a part connected between shafts and used to connect between pipe ends; It is also useful for flanges on equipment inlets and outlets used for connecting two devices, such as reducer flanges.
What is the connection method of flange tool?
What is the production process of flange tool?
What are the requirements for using the flange tool?
The flange tool connection is to first fasten two pipes, pipe fittings or devices to a flange plate, add flange pads between the two flange plates, and fasten them together with screws to make the connection. Some pipe fittings and devices have their own flanges, which are also flange connections. Flange connection is an important connection method for pipeline construction. The flange connection is easy to handle and withstands higher pressure. In industrial pipelines, in households, the diameter of the pipeline is small, and there is a low pressure, and the flange connection is not visible. If you are in a boiler room or production facility, there are flanged pipes and equipment everywhere.
First of all, we need to understand how flange tool is made, the process and product of centrifugal casting to produce a flat welding flange, which is characterized by the product being processed through the following process steps:
① Put the selected raw material steel for melting in the intermediate frequency electric furnace, so that the temperature of the molten steel reaches 1600-1700°C;
② Preheat the metal mold to 800-900 °C to maintain a constant temperature;
③ Start the centrifuge, pour the molten steel in step ① into the preheated metal mold in step ②;
④ The casting is cooled naturally to 800–900°C for 1–10 minutes;
⑤ Cool with water to approximately room temperature, demould the casting and remove it.
As for iron sheet welding flange, many customers wonder if the quality of iron sheet welding flange is better than that of forged welding flange. In fact, the quality of the iron plate welding flange is the same as that of the forged welding flange, but where the iron plate welding flange can not be guaranteed, that is, the material of the iron plate welding flange is least guaranteed, because in the general process there is no problem with the density of the iron plate welding flange, but in the production process, the blank of the iron plate welding flange is rarely tested, so that it does not pass through the material of the detected iron plate welding flange after production cannot be guaranteed.
Baier Hydraulic Power (Wuhan) Co., Ltd mainly trades in five product categories: bolting tools, hydraulic lifting tools, hydraulic drawing tools, flange tools and power supplies. Bolting tools include: square drive hydraulic torque wrench, hexagon hydraulic torque wrench, electric torque wrench, rechargeable torque wrench, cordless impact wrench, screwdriver, nut spreader, socket wrench, etc. Hydraulic lifting tools include: double-acting jacks, single-acting jacks, hollow jacks, large-tonnage jacks. Hydraulic pullers include: hydraulic pullers. The power supply includes an electric pump and an air pump as well as a hydraulic hand pump. flange tools include: flange separators, flange adjustment tools. From these products, the hydraulic torque wrench, electric wrench and hydraulic jacks were developed, which are the first products in the industry and have received national invention patents.
